2-Pack Solar LED Pathway Light - 4 Installation Methods - LumeGen

The Solar LED Pathway Light converts sunlight into energy to power this light at night without the need for electrical wiring. This versatile light can be installed four different ways! This LED light charges during the day allowing the light up to 12 hours of runtime at night with a max output of 200 lumens per light. It includes a daylight sensor which turns the light on at dusk and off at dawn. You can also select between 3 color temperatures with this light.

Installation Methods

This versatile light can be installed four different ways.

• Installation directly into the ground via stake
• Screwed into wooden decks
• Flush mounted onto a wall
• Flush mounted onto a deck post

Specifications:

• Color Temperature: 3000K/4000K/6500K Selectable
• Solar Panel: Mono-crystalline silicone
• Solar Panel Power: 5.5V, 1.2W
• Brightness: 200 Lumens
• Housing Construction: ABS
• IP Rating: IP65 wet rated
• LEDs: 32pcs x 0.5W ultra bright SMD 2835 LEDs
• LED Life Hours: 100,000 hours
• Battery: Lithium 3.7V/800mAh
• Charging Time: Up to 12 hours
• Run Time: 10-12 Hours
• Color Rending Index (CRI): >70
• Discharging Temperature: -4°F ~ 122°F (-20°C ~ 50°C)
• Sensors: Photocell sensor
• Warranty: 1 year for fixture

It is important to install this light in an area where it gets enough sunshine to charge properly! Please Note: The batteries do not come with any charge in them so the unit will need to be outside in a sunny spot for three days to build up a base charge before installing.

Product Dimensions (with Flush Mount Adapter)- 22.83" H x 4.13" W

Product Dimensions (with Ground Stake)- 27.16" H x 4.13" W

Need more lighting options? Explore flat panels, solar lighting, and more from LumeGen.